How to Use a 3/8” Cobalt Drill Bit for Metal: Clean Holes, Less Burnout
The 3/8” drill bit is a go-to for larger clearance holes, heavy-duty brackets, or structural metal work. But drilling metal cleanly at this size takes more than just power—it requires the right bit, technique, and a controlled approach. In this guide, you’ll learn how to get the most from your 3/8” cobalt drill bit, whether you’re working with mild steel, stainless, or thicker aluminium.
What Is a 3/8” Drill Bit Used For?
Body Text:
A 3/8” drill bit (equal to 9.53mm) is often used when drilling:
Larger holes for bolts, fixings, and pass-throughs
Mounting points in thick steel or alloy panels
Bracket fabrication, agricultural repairs, and heavy-duty frames
Jobs where smaller pilot holes aren’t enough
It’s a bit size that demands both strength and technique when used on metal.
Why Choose a Cobalt Drill Bit for Metal?
Body Text:
Standard HSS bits can struggle when drilling thick or hard metals—especially at this size. That’s where cobalt comes in.
Advantages of Cobalt:
Stronger cutting edge that resists heat and dulling
Great for repeated use on stainless steel and hard steel
5% cobalt (M35 grade) blends performance and durability
Withstands friction better than titanium or HSS coatings
🧠 8% cobalt bits are available but often more brittle. Most pros rely on 5% cobalt for everyday high-strength jobs.
Best Drill Speed for a 3/8” Bit
Intro Text:
Larger bits generate more friction—so slower RPMs are essential when drilling metal with a 3/8” bit.
Metal Drilling Tips for 3/8” Cobalt Bits
Bullet Tips:
✅ Use Metal Cutting Paste – Reduces heat and keeps your cutting edge sharp longer.
✅ Clamp Securely – Prevent the bit from walking and ensure better accuracy.
✅ Use a Pilot Hole – For thick material, start with a smaller bit to reduce stress on the 3/8″.
✅ Drill in Bursts – Back off every few seconds to clear chips and cool the bit.
✅ Avoid Speeding Through – Let the bit cut, don’t force it.
Close-up of a 3/8” cobalt drill bit — ideal for thick steel, stainless, and hard alloys.
Frequently Asked Questions
Can a 3/8” cobalt bit go through stainless steel?
Yes, as long as you use slow speed, firm pressure, and cutting paste.
What is the metric size of a 3/8” drill bit?
3/8” equals 9.53mm.
Do I need a pilot hole before using a 3/8” bit?
For thick or hard metal, yes—it helps guide the larger bit and reduces strain.
What’s the risk of going too fast?
You’ll overheat the bit, dull the edge, and possibly scorch or deform the metal.
A 3/8” drill bit is powerful—but only when used properly. With a cobalt cutting edge, the right speed, and a bit of prep, you’ll get clean, burr-free holes even in demanding metals.






