CUT-IT Drill Bit Cutting Fluid – Professional Metal Cutting Paste
The premium metal drilling lubricant trusted by professionals. CUT-IT reduces heat, extends tool life, and stays put — even for overhead drilling.
CUT-IT Drill Bit Cutting Fluid – Professional Metal Cutting Paste
$37.95
CUT-IT Drill Bit Cutting Fluid is a professional metal cutting paste that keeps your drill bits cool and sharp while drilling or tapping. Designed for steel, stainless steel, and aluminium, it reduces heat, prevents wear, and stays in place — even for overhead drilling.
- ✅ Reduces friction & improves cutting speed
- ✅ Extends drill bit life up to 4X
- ✅ Perfect for drilling, tapping & reaming metals
CUT-IT Drill Bit Cutting Fluid – Premium Metal Cutting Paste
CUT-IT is a professional-grade drill bit cutting fluid and metal cutting paste that outperforms ordinary cutting oils. Designed for drilling, tapping, and machining tough metals, it keeps tools cool, sharp, and efficient.
Why Choose CUT-IT?
- ✅ Reduces friction and heat buildup
- ✅ Extends tool life
- ✅ Stays in place — perfect for overhead drilling
- ✅ Works with hand and power tools
- ✅ Safe, non-toxic and eco-friendly
Whether you're a mechanic, engineer, or metal fabricator, CUT-IT makes every drilling or tapping job easier, cleaner, and faster.
Pair it with the TTP HARD cobalt drill bit set for the ultimate performance on hard metals.
Additional information
| Weight | 1.33 lbs |
|---|---|
| Dimensions | 3.5 × 3.55 × 3.8 in |
Discover What Makes CUT-IT Different
Unlike thin cutting oils that drip or spin off, CUT-IT’s thick paste formula stays exactly where you apply it. That means cleaner holes, cooler tools, and longer bit life — even when drilling overhead or on stainless steel. CUT-IT is a superb cutting fluid for aluminum drilling and is widely used as the preferred option amongst professional aluminum cladding installers.
See CUT-IT in Action
Step Drilling Hardened Steel with Imperial Cobalt Drill Bits
The Science Behind CUT-IT Metal Cutting Paste
1️⃣ Reduces Friction & Heat
Forms a lubricating barrier that keeps cutting edges cool and sharp.
2️⃣ Stays in Place
Unlike liquid oils that drip or spin off, CUT-IT clings to the tool for consistent protection.
3️⃣ Perfect for All Metals
Performs equally well on stainless steel, cast iron, aluminium and brass. Learn more about the best lubricant for drilling stainless steel.
CUT-IT vs Traditional Cutting Oils
| Feature | CUT-IT Paste | Conventional Cutting Oil |
|---|---|---|
| Consistency | Thick paste – stays where applied | Thin liquid – runs off |
| Overhead Drilling | ✅ Excellent | ❌ Poor |
| Lubrication Strength | High | Moderate |
| Cooling Performance | Excellent | Short-term |
| Tool Life Extension | Up to 4 x longer | Limited |
| Eco-Safety | Non-toxic | Can irritate skin |
How to Apply CUT-IT for Best Results
- Apply a small amount directly to your drill bit or tap.
- Use correct speed – see our Drill Bit Speed Chart.
- Reapply during long operations.
- Wipe clean after use.
💡 Pro Tip: Pair with the TTP HARD Cobalt Drill Bit Set for maximum performance.
Independent Extreme-Pressure Testing
To verify performance under load, CUT-IT Metal Cutting Paste was independently tested using the ASTM D 3233-93 Standard Test Methods for Measurement of Extreme Pressure Properties of Fluid Lubricants (Falex Pin and Vee Block Methods). These industry-standard tests measure a lubricant’s ability to prevent seizure and wear when subjected to high frictional forces.
The results confirmed CUT-IT’s exceptional load-bearing capacity, film strength, and wear protection. Even at maximum test loads, the paste maintained full lubrication and prevented scoring of the pin and vee block surfaces — a performance level that exceeds most cutting oils and sprays.
View Full ASTM D 3233-93 Test Report (PDF)
CUT-IT ASTM D3233-93 Falex Extreme Pressure Test Demo
Proven Performance — Tested and Reviewed
“This paste is awesome and way beyond any cutting oil.”
“Performed above my head on ¼-inch plate — stayed put and kept bit cool.”
“Excellent product, best on the market in my opinion.”
View Full Customer Reviews →
FAQs About CUT-IT Drill Bit Cutting Fluid
What is CUT-IT used for?
A premium drill bit cutting fluid that reduces friction and heat during drilling and tapping metals.
Can I use it instead of cutting oil?
Yes — its paste formula stays in place where liquid oils run off.
Does it work on stainless steel and aluminium?
Absolutely. It excels on stainless steel, mild steel, cast iron and aluminium.
Is it safe to use?
Yes, CUT-IT is non-toxic and eco-friendly when used as directed.
Buy CUT-IT Professional Metal Cutting Paste
- Shipping: From Michigan warehouse – USA & Canada
- Weight: 1.33 lb
- Dimensions: 3.5 × 3.55 × 3.8 in
Reviews
There are no reviews yet.